Drywall is chosen over plaster because it has incredible benefits such as a more affordable price and easier installation. However, drywall can experience many problems that need a fast repair to prevent further damage to the home. You can make many of the repairs yourself. Of course, when you cannot repair the drywall on your own, it’s time to call a professional to handle the drywall repair fort worth tx.
Four common drywall problems and easy fixes:
1. Over Sanding: Smoothing out drywall is done by sanding the surface. This is often done too much and results in over sanding. This compresses the integrity of the wall and can result in disaster in a few weeks or months. Use a light to spot sand bumps and problematic areas instead.
2. Tight Joints: Joints that are secured too tightly can cause panels to break. Make sure there is always a ⅛” gap between each panel as you install drywall to prevent this problem. There is no other possible solution to this problem.
3. Screwy problems: A screw that is driven too far is certainly a problem that far too many people elect to ignore. Do not be among those people. Screws driven in too far damage the paper surface of the wallpaper. Drive the screwhead directly over the paper’s cover surface to avoid this problem. Allow an extra quarter or half turn to place the crew underneath the surface.
4. Misaligned Holes: Misaligned holes is another problem because it is difficult to cut perfectly aligned holes on a sheet of drywall. Make sure to triple check that your holes are properly aligned before cutting. Once it’s done, it’s done and leaves an ugly sight in the home.
Drywall problems can and will occur, including those above. Don’t allow these problems to occur at your home!